O kaip sužinoti, ar automatinių langų funkcija apskritai yra?
Pas mane saab 93, 2004m.
Automatiškai langai tik atsidaro, į viršų reikia laikyti.
Bandžiau kalibruoti kaip visur rašo - niekas nesikalibruoja.
Dar čia vienam forume perskaičiau, kad:
Dont hold the button as if your doing an auto close / auto open, you have to half press the button as if your manually closing - here's the process:-
1) Half hold the button and close the window all the way up, hold button in the up position for 2 seconds.
2) Half hold the button and open the window all the way down, hold button in the down position for 2 seconds.
3) Half hold the button and close the window all the way up, hold button in the up position for 2 seconds.
4) Half hold the button and open the window all the way down, hold button in the down position for 2 seconds.
5) Half hold the button and close the window all the way up, hold button in the up position for 2 seconds.
6) Half hold the button and open the window all the way down, hold button in the down position for 2 seconds.
Nesu tikras, ar pas mane ten yra "dvi padėtys", t.y. half and full. Eisiu dar pagal šitą pasibandyti.
Štai ką rašo manualas:
Automatic closing (option, certain variants only):Raise the button all the way and
release it. If the window does not close automatically, refer to Calibration on page 119.
Tai iš kur žinoti ar mano modelis turi šią funkciją ar čia žaidžiu tik be reikalo? Jau gal 5 kartus ėjau "kalibruoti"...
Jeigu stabdau langą laikydamas uždarymo mygtuką, tai langą sustabdau, bet gana sunkiai - nesijaučia, kad būtų kažkokia apsauga. Atgal jis pats nenusileidžia (po sustabdymo ranka).
[edit]
Patikrinau - "vidurinė" pozicija yra tik į apačią, į viršų nėra. Tai turbūt ir automatinio uždarymo funkcijos nėra.
Ir visgi neįsiskaičiau manualo:
Raise the front edge of the button one step.
The window will stop when it is fully closed or when the button is released.
Automatic closing (option, certain variants only):Raise the button all the way and release it. If the window does not close automatically, refer to Calibration on page 119.